Stafford Gage & Tool Inc.
Machinery Listing
Production Equipment
2 - Hitachi-Seiki SII Turning Centers 2" thru Spindle, 700 IPM Rapid Travel.
1 - Hitachi-Seiki 20J Turning Center 2.5" thru spindle, 700 IPM Rapid Travel.
1 - DAEWOO Puma C Production Turning Center, 2.5" thru spindle, 787 IPM Rapid Travel, LNS Servo type bar feed.
2 - B&S Screw Machines 3/4" capacity.
1 - HAAS VF3 Vertical Machining Center 40" x 20" x 25" work envelope. X travel is reduced by 12" when fourth axis is installed. 7,500 RPM Spindle, 20 Station ATC's.
2 - HAAS VF2 Vertical Machining Centers 30" x 16" x 20" X axis travel is reduced when fourth axis is installed. 6,000 and 7,500 RPM Spindles, 20 Station ATC's.
(NOTE: All HAAS VMC's are equipped with rigid tapping option to assure proper tapped hole depth.)
1 - Hitachi-Seiki VM 40II Vertical Machining Center, with 12,000 RPM Spindle.
1 - OKADA Vertical Machining Center 19" x 14" x 20".
*** All CNC machines are capable of direct numerical control. Program length is limited only by the available hard drive space ***
2 - Dennison hydraulic Broaching presses to 30 ton capacity.
1 - DoAll Production cut-off saw.
1 - #2 Cincinnati Centerless grinder size capacity 3.5"
3 - Bridgeport type manual milling machines.
1 - Ex-Cell-O Ram type EDM Machine.
2 - Boyar-Schultz Surface grinders.
1 - Okamoto Hydraulic Surface Grinder Capacity 12" x 24"
1 - B&S O.D. Grinder 6" x 24"
1 - Heald I.D. Grinder 9" x 18"
1- DoAll 16: Contour Band Saw.
1 - 2 Cu. Ft. Vibrodyne Vibratory Finishing Machine.
1 - 1/8 Cu. Ft. Vibrodyne Vibratory Finishing Machine.
1 - LeBlond 15" lathe.
1 - Sunnen Hone to 2-1/2" diameter.
Fabrication Equipment
1 - TIG Welder 200 amp capacity
1 - MIG Wire feed Welder 200 amp capacity
1 - Set Torches, including cutting head
1 - 20 Ton H-frame press
1 - Tubing Bender 1-1/2" capacity.
1 - 20" Abrasive Cut-off Saw.
1 - 20" Disk Grinder
1 - Baldor Belt Sanding Machine.
Inspection Equipment
1 - Metronics QUADRA-CHECK 2000 14" Optical Comparator.
1 - J&L Optical Comparator 14" Horizontal type.
4 - Sets Gage Blocks, 3 English, 1 Metric.
1 - Sheffield Comparator, 0.0001 accuracy.
1 - Sheffield Comparator, 0.00001 accuracy.
1 - 18" Starrett Hite-Check, 0.0001 accuracy.
1 - Browne & Sharpe Granite master Square.
1 - 24" x 36" Granite Surface Plate. Inspection Quality.
Miscellaneous Inspection equipment such as Gage Pins, Micrometers, Inter-Mikes, Thread mikes, Indicating mikes, Bore Gages, Height Gages, and necessary support equipment to insure accuracy to dimensional requirements traceable to NIST.
CAD-CAM Capabilities
SURFCAM 2002+ CAD-CAM Software operating on a Pentium 4 with 256 Mb RAM, and 8Mb Video RAM to support three dimensional contouring and surface construction, including 4 axis machining.
CAM Translators to support IGES, and DFX formats, as well as other file types.
CAD drafting capabilities to D size drawings from AutoCAD 14, and to create solid parts from two dimensional drawings.
Please call for additional information, or e-mail us at: jean@sgandt.com. An electronic copy of the file data may be included if you desire.
Miscellaneous Equipment
New Hermes Engraving Machines (2)
1 -Sand Blasting Cabinet, 30" x 24" x 20" box.
1 - Fork Lift, #5,000 Capacity, propane powered.
Facilities
Stafford Gage & Tool Inc., is in a modern Air Conditioned11,000 sq. ft. building.
10,000 Sq. Ft. Manufacturing Area.
1,000 Sq. Ft. Office Space.
Dock Facilities.
Centrally Located to Heat-Treat and Surface Treatment Outside Resources.
Located five minutes from the intersection of I70 and I75, "The Crossroads of America".